VINTAGE OWNER'S MANUALS, SERVICE MANUALS, BROCHURES AND PUBLICATIONS
Welcome to Automatic Ephemera, a library for historical research and education, sharing public domain documents relating to vintage products for
the home. You are viewing the low-resolution preview, high-resoultion versions are also available for most documents.
The scanning of all high-resolution documents is done at 300dpi with the utmost diligence and care to produce high quality .pdf files which have text
search capabilities built-in to bring modern convenience to vintage printed materials.
The high resolution also allows for close-up examination of all images on your computer monitor and in many cases makes
reading the text easier than the original document. Quality printers can print these documents nearly identically to the original document. Maintaining a library as such is a
time consuming and expensive venture, all materials have a small download fee to offset the library's many expenses.
In order to read these documents you need Adobe
Reader 7 or greater installed on your computer. Click here for samples of the Documents in our library.
If you have had any recent download purchases please see your download page.
If you have had any recent download purchases please see your download page.
1959 Frigidaire Dryer Service Tech-Talk (continued)
Page 29 of 32 First Page
< Back (Page 28)
> Next (Page 30)
...
Last (Page 32)
You are viewing a low-resolution preview. Available here is the high-res/32 page PDF version of this document ($2.64), most printers can output this nearly identically to the original document.
Automated Summary of Text on this Page:
2. Remove the interior lamp mounting panel.
3. Clamp the leads of a range oven tester to the thermostat bulb via the lamp panel opening.
4. Replace the lamp mounting panel.
5. Replace the rear cover.
6. Load the drum with six pounds of dry cotton fabrics, preferably turkish towels which are at room temperature.
7. Turn on the dryer and allow it to run. Note the temperature when the thermostat shuts off the heating element. At this time, the cutoff temperature should be between 200°F. and 210°F. at REGULAR heat position.
Note: There will probably be an overshoot of from 6° to 10°F. after the thermostat shuts off the heater elements due to the stored heat within the drum housing. When the check is started, the dryer must be at room temperature to obtain accurate readings.
S. Cleaning -Lint Removal on DCI-59 Model:
(Also see User's Instruction Booklet.)
1. Remove the condensate pan and clean.
2. Remove the Filtrator and flush the lint from the top and the tubes by the use of water and a short piece of hose.
3. Using the hook provided on the handle end of the cleaning brush, provided with the product, pull the cover from the access hole in the rear of the drum.
4. Place the brush behind the drum and slowly rotate the drum. Accumulated lint will drop to the bottom. Relocate the brush several times as necessary to reach all areas of the back panel.
5. Again using the brush, clean between the drum and the lower part of the housing surrounding the drum. This operation must be performed on both right-hand and left-hand sides. It can be observed through the loading port opening.
6. Clean the lint from the top of the Filtrator base.
7. Clean lint from the vent slots on left side of Filtrator support, pass wire handle of brush across slots, using hook to dislodge any lint as illustrated in Figure 41. Note: The user should be instructed in this operation since these vents should be checked at frequent intervals to be sure they are not clogged. Further cleaning in the rear of the dryer can be accomplished, if needed, through the lamp access opening. Remember-the power supply must be disconnected before removing the lamp mounting bracket.
Figure 41
DCI-59 Cleaning Filtrator Base Holes
Home Ec-Talk
Mary E. Huck
59 Line is the Finest Yet
The 1959 Frigidaire Dryer line should prove a joy to any homemaker because the many new features not only meet comparable competitive features, but of more importance they answer the needs and desires of our customers.
What are these needs? Well, one of the most frequently asked questions is: "How can I tell how long to dry my clothes?" The answer is that on 1959 Imperial and Custom Imperial models she doesn't have to know how. These dryers incorporate the "Automatic Drying Cycle" which requires no estimate of drying time. Most of the family wash requires the homemaker to simply place the clothes in the dryer, set the Fabric Heat Selector and Time Control for the type fabrics being dried, and the dryer does the rest. There will be no overdried or underdried clothes. Generally, the following settings should be used:
Regular-Regular loads of cottons and linens, such as tea towels, sheets, tablecloths.
Delicate-Lingerie, blouses, and other sheer or delicate garments.
Bulky-Rugs, bedspreads, work clothes, bath towels.
Many homemakers will not be completely .satisfied with an "Automatic" answer because they prefer to damp-dry clothes based on past experience. If so, the 1959 Imperial and Custom Imperial models also provide a "Timed Drying Cycle." This can be used the same as in past models and in addition the timed cycle is recommended for special garments such as woolens, Wash and Wear, sheer curtains, blankets, pillows, and for fluffing with no heat. Then, too, as an additional help, a new "Automatic Signal" will sound at the end of the timed cycle to remind the customer that clothes should be removed immediately, especially when using the "Wrinkles-Away" Cycle.
When mentioning "Wrinkles-Away," we must remember another desire of our customers and that is saving of ironing time. "Wrinkles-Away" can reduce ironing time as much as 9 hours each week, depending upon the number of Wash and Wear garments the family may use. This feature is offered on all models and the principle and use remains the same as in 1958 models. Certain limitations regarding garments with accordian pleats and nylon, orlon, and dacron curtains are pointed out in the Instruction Book.
Let's not overlook the desire of customers to enjoy another new feature provided in Imperial and Custom Imperial Models. We refer to "Automatic Sprinkling" because in these busy days, homemakers often have to do their ironing in "bits," rather than all at once. If
You are viewing a low-resolution preview. Available here is the high-res/32 page PDF version of this document ($2.64), most printers can output this nearly identically to the original document.
Automated Summary of Text on this Page:
2. Remove the interior lamp mounting panel.
3. Clamp the leads of a range oven tester to the thermostat bulb via the lamp panel opening.
4. Replace the lamp mounting panel.
5. Replace the rear cover.
6. Load the drum with six pounds of dry cotton fabrics, preferably turkish towels which are at room temperature.
7. Turn on the dryer and allow it to run. Note the temperature when the thermostat shuts off the heating element. At this time, the cutoff temperature should be between 200°F. and 210°F. at REGULAR heat position.
Note: There will probably be an overshoot of from 6° to 10°F. after the thermostat shuts off the heater elements due to the stored heat within the drum housing. When the check is started, the dryer must be at room temperature to obtain accurate readings.
S. Cleaning -Lint Removal on DCI-59 Model:
(Also see User's Instruction Booklet.)
1. Remove the condensate pan and clean.
2. Remove the Filtrator and flush the lint from the top and the tubes by the use of water and a short piece of hose.
3. Using the hook provided on the handle end of the cleaning brush, provided with the product, pull the cover from the access hole in the rear of the drum.
4. Place the brush behind the drum and slowly rotate the drum. Accumulated lint will drop to the bottom. Relocate the brush several times as necessary to reach all areas of the back panel.
5. Again using the brush, clean between the drum and the lower part of the housing surrounding the drum. This operation must be performed on both right-hand and left-hand sides. It can be observed through the loading port opening.
6. Clean the lint from the top of the Filtrator base.
7. Clean lint from the vent slots on left side of Filtrator support, pass wire handle of brush across slots, using hook to dislodge any lint as illustrated in Figure 41. Note: The user should be instructed in this operation since these vents should be checked at frequent intervals to be sure they are not clogged. Further cleaning in the rear of the dryer can be accomplished, if needed, through the lamp access opening. Remember-the power supply must be disconnected before removing the lamp mounting bracket.
Figure 41
DCI-59 Cleaning Filtrator Base Holes
Home Ec-Talk
Mary E. Huck
59 Line is the Finest Yet
The 1959 Frigidaire Dryer line should prove a joy to any homemaker because the many new features not only meet comparable competitive features, but of more importance they answer the needs and desires of our customers.
What are these needs? Well, one of the most frequently asked questions is: "How can I tell how long to dry my clothes?" The answer is that on 1959 Imperial and Custom Imperial models she doesn't have to know how. These dryers incorporate the "Automatic Drying Cycle" which requires no estimate of drying time. Most of the family wash requires the homemaker to simply place the clothes in the dryer, set the Fabric Heat Selector and Time Control for the type fabrics being dried, and the dryer does the rest. There will be no overdried or underdried clothes. Generally, the following settings should be used:
Regular-Regular loads of cottons and linens, such as tea towels, sheets, tablecloths.
Delicate-Lingerie, blouses, and other sheer or delicate garments.
Bulky-Rugs, bedspreads, work clothes, bath towels.
Many homemakers will not be completely .satisfied with an "Automatic" answer because they prefer to damp-dry clothes based on past experience. If so, the 1959 Imperial and Custom Imperial models also provide a "Timed Drying Cycle." This can be used the same as in past models and in addition the timed cycle is recommended for special garments such as woolens, Wash and Wear, sheer curtains, blankets, pillows, and for fluffing with no heat. Then, too, as an additional help, a new "Automatic Signal" will sound at the end of the timed cycle to remind the customer that clothes should be removed immediately, especially when using the "Wrinkles-Away" Cycle.
When mentioning "Wrinkles-Away," we must remember another desire of our customers and that is saving of ironing time. "Wrinkles-Away" can reduce ironing time as much as 9 hours each week, depending upon the number of Wash and Wear garments the family may use. This feature is offered on all models and the principle and use remains the same as in 1958 models. Certain limitations regarding garments with accordian pleats and nylon, orlon, and dacron curtains are pointed out in the Instruction Book.
Let's not overlook the desire of customers to enjoy another new feature provided in Imperial and Custom Imperial Models. We refer to "Automatic Sprinkling" because in these busy days, homemakers often have to do their ironing in "bits," rather than all at once. If
Page 29 of 32